static router setting are as follows:
- first, create the framework of the network as shown below.
- red wire using DCE cable
- black cable lines using the Cross-over type cable
· then, setting ip, subnet and default Gateway to PC
· The COnfiguration is :IP Subnet DefGW
Show/Hide
· then setting the router ip with CLI facility
o Router 0 :
§ Router > enable
§ Router#conf t
§ Router(config)#interface fa0/0
§ Router(config-if)#ip address 192.168.1.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface fa1/0
§ Router(config-if)#ip address 192.168.2.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface se2/0
§ Router(config-if)#ip address 10.10.10.1 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
o Router 1 :
§ Router > enable
§ Router#conf t
§ Router(config)#interface fa0/0
§ Router(config-if)#ip address 192.168.3.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface fa1/0
§ Router(config-if)#ip address 192.168.4.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface se2/0
§ Router(config-if)#ip address 10.10.10.2 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
§ Router(config)#interface se3/0
§ Router(config-if)#ip address 10.10.15.1 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
o Router 2 :
§ Router > enable
§ Router#conf t
§ Router(config)#interface fa0/0
§ Router(config-if)#ip address 192.168.5.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface fa1/0
§ Router(config-if)#ip address 192.168.6.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface se2/0
§ Router(config-if)#ip address 10.10.16.1 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
§ Router(config)#interface se3/0
§ Router(config-if)#ip address 10.10.16.1 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
o Router 3 :
§ Router > enable
§ Router#conf t
§ Router(config)#interface fa0/0
§ Router(config-if)#ip address 192.168.7.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface fa1/0
§ Router(config-if)#ip address 192.168.8.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface se2/0
§ Router(config-if)#ip address 10.10.16.2 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
§ Router(config)#interface se3/0
§ Router(config-if)#ip address 10.10.17.1 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
o Router 4 :
§ Router > enable
§ Router#conf t
§ Router(config)#interface fa0/0
§ Router(config-if)#ip address 192.168.9.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface fa1/0
§ Router(config-if)#ip address 192.168.10.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface se2/0
§ Router(config-if)#ip address 10.10.18.1 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
§ Router(config)#interface se3/0
§ Router(config-if)#ip address 10.10.17.2 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
o Router 5 :
§ Router > enable
§ Router#conf t
§ Router(config)#interface fa0/0
§ Router(config-if)#ip address 192.168.1.11 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface fa1/0
§ Router(config-if)#ip address 192.168.2.12 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface se2/0
§ Router(config-if)#ip address 10.10.18.2 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
§ Router(config)#interface se3/0
§ Router(config-if)#ip address 10.10.19.1 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
o Router 6 :
§ Router > enable
§ Router#conf t
§ Router(config)#interface fa0/0
§ Router(config-if)#ip address 192.168.13.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface fa1/0
§ Router(config-if)#ip address 192.168.14.1 255.255.255.0
§ Router(config-if)#no shutdown
§ Router(config-if)#exit
§ Router(config)#interface se3/0
§ Router(config-if)#ip address 10.10.19.2 255.255.255.224
§ Router(config-if)#no shutdown
§ Router(config-if)#clock rate 9600
§ Router(config-if)#exit
· Then, setting the RIProuting protocol to each router :
- Using This Command :
- Router 0
- Router>enable
- Router#conf t
- Router(config)#route rip
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 192.168.1.0
- Router(config-router)#network 192.168.2.0
- Router(config-router)#
- Router(config-router)#exit
- Router 1
- Router>enable
- Router#conf t
- Router(config)#route rip
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 192.168.3.0
- Router(config-router)#network 192.168.4.0
- Router(config-router)#
- Router(config-router)#exit
- Router 2
- Router>enable
- Router#conf t
- Router(config)#route rip
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 192.168.5.0
- Router(config-router)#network 192.168.6.0
- Router(config-router)#
- Router(config-router)#exit
- Router 3
- Router>enable
- Router#conf t
- Router(config)#route rip
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 192.168.7.0
- Router(config-router)#network 192.168.8.0
- Router(config-router)#
- Router(config-router)#exit
- Router 4
- Router>enable
- Router#conf t
- Router(config)#route rip
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 192.168.9.0
- Router(config-router)#network 192.168.10.0
- Router(config-router)#
- Router(config-router)#exit
- Router 5
- Router>enable
- Router#conf t
- Router(config)#route rip
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 192.168.12.0
- Router(config-router)#network 192.168.130
- Router(config-router)#
- Router(config-router)#exit
- Router 6
- Router>enable
- Router#conf t
- Router(config)#route rip
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 10.0.0.0
- Router(config-router)#network 192.168.14.0
- Router(config-router)#
- Router(config-router)#exit
- When finished, use the Trace route test
- If it worked, check using ping facility, if it is reply, it means that your RIP works,
- GoodJob Friends! :D
- This is For my Paket Tracer Files : Download
