iPad - Troubleshooting Wi-Fi Networks and Connections

Posted by Riken Afandi on November 12, 2011


Did you consider the two most important things while buying an iPad? Wi-Fi or Wi-Fi +3G connection. Probably you picked an iPad and it became a part of you. Surfing became easier, watching movies and reading was so natural but now you have a problem with connectivity. Phones that have Wi-Fi and 3G network connectivity have an added advantage because if there is no wireless network, one can still use the 3G. If you rely on Wi-Fi only you can experience some problems like;
• Low or weak signal.
• Failure to access the internet even when the Wi-Fi is connected.
• Failure to locate or join a nearby Wi-Fi. connection.
It is very easy to logically look for the sources of the problem by following the following basic steps
1. Verify the settings
these can be done by tapping the setting icon, turning the Wi-Fi off and turning it on again. If the connection is still impossible then you can tell the phone to forget what it knows and give it new settings. Go to the Wi-Fi network screen and check individual settings, tap 'Forget this network' and verify by tapping 'Forget'. A list is provided and this enables you to reconnect by choosing your network from the list.
2. Router
before attempting the complicated troubleshooting try moving you device closer to the router. Being too far away may weaken the signal or cause slow connections. It's also advisable to try connecting other devices to the router to see if it's working. You can try this by connecting your laptop or desktop to the wireless network. When any other device is working the problem may not be the router.
3. Remove any barrier
this may include any case or covering on the iPad. This may sound unbelievable but any obstruction may weaken the signal. It may not solve the problem but it can increase the signal strength.
4. Verify the password
if you are joining a network that needs a password it's important to make sure you entering the correct password. Some passwords may have letters that look the same but are very different like 'o' and '0', 8 and B,. When this does not work go to the final step.
5. Renew the lease
if your lease has expired you can renew it by tapping the blue button on the right of the network name. This will take you to the network settings. Chose the 'Renew lease' and verify by touching the 'Renew' button. Hope this solves all your connectivity problems if not, contact your service provider.

{ 0 Comment... read them below or add one }

Post a Comment

Related Posts Plugin for WordPress, Blogger...